Nissan Titan 4WD Light On – Why And What To Do?

At this point, you might be standing in front of your Nissan Titan 4WD, wondering why its lights are still on even after disengaging the engine. Why did this problem appear? Also, what can you do to fix it? We researched these concerns for you and here’s what we found.

The 4WD light may persist on your Nissan Titan’s dashboard because of a fuse malfunction or a bad battery. So, troubleshoot your vehicle first to figure out which underlying problem exists in the pickup truck. Then, use the correct technique to remedy the situation at its source.

Keep reading as we discuss these possible suspects to the persisting 4WD light on your Nissan Titan in greater detail. We’ll also share the potential solutions to these underlying issues for your convenience.

What Causes The 4WD Light On The Nissan Titan To Stay On?

A persisting 4WD light on a Nissan Titan typically comes from a fault from either a fuse or a bad battery. Although solving these underlying issues is usually a DIY-friendly job, it's still important to understand why the error happens. That way, you might be able to prevent the problem from resurfacing.

Fuse Malfunction

Automotive fuses help vehicles, including your Nissan Titan, in reducing the electrical current flowing through different systems. These components are like your home's circuit breakers that aid in preventing harm to connected assemblies and parts in the event of overloads or short circuits.

A fuse malfunction or breakdown may also become the suspect to your Titan’s 4WD light remaining on, even after disengaging the engine. Replacing the faulty fuse could solve this problem.

Bad Battery

Purchasing a low-quality battery may help you save money to power your Nissan Titan. But the subpar properties offered by the poor power source may cause errors and glitches in the pickup truck. Aside from the 4WD light staying on, other side effects of installing a bad battery to a vehicle may include:

• Slow start
• Failure to start
• Heavy corrosion
• The frequent need for jump starts
• Clicks, cranks, and other sounds coming from the engine

How To Fix Nissan Titan 4WD Lights That Remain On?

In this section, you’ll learn the possible solutions to fixing a persisting 4WD light on a Nissan Titan. Keep in mind that these techniques don’t guarantee a permanent resolution to the problem. If the error persists, it might be a good idea to send the pickup truck to reliable automotive repair technicians.

Replace The Fuse

Fuses #14 and #53 typically control the 4WD light on your Nissan Titan. Once you have these fuses, continue this DIY-friendly replacement job by following these steps:

Step-by-Step Guide

1. Disengage the Nissan Titan’s engine and let it cool for about 10 minutes.
2. Open the pickup truck’s hood.
3. Open the fuse box, which is often at the top of the vehicle’s battery.
4. Remove the #14 and/or #54 fuses and replace it/them with the new models.
5. Close the fuse box and go inside the Titan’s cabin to check if the problem persists.

Check out this automotive fuse set on Amazon.

You can also watch the video below if you need help in finding the location of the fuse box under the hood of a Nissan Titan:

Replace The Battery

Invest in a good-quality automotive battery for your Nissan Titan before proceeding with this procedure. If not, the 4WD light may remain on, and other problems might arise because of the poor-quality product.

Aside from the battery, you only need a few other things to start and complete this replacement job. So, continue reading this section to know the necessary tools, along with the general steps for this operation:

What You’ll Need

• Wrench
• Socket wrench with extension
• Replacement battery

Step-by-Step Guide

1. Park the Nissan Titan in a safe and shaded location.
2. Engage the parking brake.
3. Let the pickup truck cool for about 10 minutes before opening the hood.
4. Remove the wire connected to the battery’s negative terminal.
5. Remove the wire connected to the battery’s positive terminal.
6. Unscrew the bolts securing the battery to its bracket.
7. Pull out the old battery from its bracket.
8. Install the new battery and secure it to the mount.
9. Return the positive wire to the positive terminal.
10. Reconnect the negative wire to the negative terminal.
11. Check the Nissan Titan’s dashboard to see if the 4WD light disappeared or continues to stay on.

Check out this product on Amazon.

Remember to send your Nissan Titan to a trustworthy automotive service center if you believe you don’t have the necessary confidence or know-how to start and complete this procedure. You can also watch the video below for a visual guide of the steps mentioned above:

It’s also a good practice to clean the terminals while doing the battery replacement job. Doing so helps maintain the battery’s functions and reduces the risks of it encountering certain issues. Watch the following video if you need help with this operation:

How Do You Reset The ECU On A Nissan?

The electronic control unit (ECU) is responsible for controlling different parts, assemblies, and systems of different vehicles, including Nissan Titans. Resetting this module may remove certain errors, which might include persisting 4WD lights.

To reset the ECU on a Nissan vehicle, follow these steps:

Step-by-Step Guide

1. Insert the ignition key and turn it to the "on" position.
2. Press the gas pedal five times quickly.
3. Wait 10 seconds after the fifth press.
4. Press and hold the gas pedal for about 12 seconds or until the check engine light blinks.
5. Remove your foot from the gas pedal.
6. Wait another 10 seconds.
7. Press and hold the gas pedal for about 10 seconds, which should make the check engine light blink faster than before.
8. Turn the ignition key to the off position and wait for 2 minutes.

Watch this video for a visual representation of the steps mentioned above:

What Do The Warning Lights Mean On A Nissan Titan?

Apart from the 4WD light, other warning lights that you should watch out for on your Nissan Titan are:

• Anti-lock brakes (ABS): Appear when the ABS encountered an error or fault.
• Coolant temperature high: Typically turns on when the engine is overheating.
• Engine oil pressure low: Indicates when the oil reservoir is running low.
• Low tire pressure: This might also appear as “check tire pressure,” which reminds you to refill the Titan’s tires.
• Malfunction: This may indicate a range of issues like a loose fuel cap.

How Much To Repair A Nissan Titan?

A Nissan Titan will typically require about $304 in maintenance and repair costs during its first year in service. Like other vehicles, the expenses to care for and fix problems on this pickup truck increase over time. So you might also need to spend about $1,830 to maintain and repair a 12-year-old Titan.

Final Words

You might be able to fix a Nissan Titan’s 4WD light that persists by replacing the right fuse or the vehicle’s battery. These replacement jobs shouldn’t demand extensive knowledge and skill in repairing vehicles. Still, you can request help from seasoned experts in the automotive industry if you need professional assistance.

If you want to know the answers to other Nissan Titan concerns, check out these other great reads:

Water In Door Of Nissan Titan—Why And What To Do?

How To Tell If My Nissan Titan Is Flex Fuel?